The process of tree services in Penrith is almost 40 years old now. Since that time, it has gained considerable popularity among the landscaping industry and locals. Some businesses do specialize in tree lopping or tree felling in Penrith, whilst others offer services for general tree care or even tree removal from the surrounding areas. In this article we will look at the processes and equipment required when tree lopping or tree felling in Penrith occurs.
As with most DIY projects, there are some pre-planning stages that need to be addressed. The first stage is to identify the locations where you want to cut down the trees. Once this is identified, the tree specialist can then find out the different types of trees in these locations, their respective mature sizes and how many branches each tree has. From this information, the tree specialist can then decide on the right cutting height for a tree. Once the cutting height is established, the tree services company can then discuss the procedure and equipment required during tree felling or cutting in Penrith.
The tree services in Penrith involves the removal of the top few meters of the tree. It also involves removing some of the lower sections of the tree, depending on the tree's mature height. The tree specialist or arborist uses a hydraulic arm to remove the tree. This arm is connected to a machine which involves cutting the tree into sections according to the demands of the tree. This process is often used for tree trimming, felling or removal, where the tree needs to be removed and moved elsewhere.
After cutting, the tree must be left to dry for a few days, so that it can slowly decay. If it is not dried properly, the resulting dry branch will most likely break off during the drying process, causing dead branches to drop from the tree. Once the dead branches have fallen off, they are removed and disposed of. However, if the tree must remain on the site, some tree services in Penrith can install drainage systems, which will allow the tree to dry out fully, after which it can be moved.
Many people often confuse the process of tree removal with tree pruning. While both processes involve taking out large dead and unstable branches, tree experts say that tree pruning actually removes small, immature and energy-efficient branches, which are more useful for the environment. In addition, tree experts say that pruning promotes root growth through the employment of blunt edges or sharp cuts.
Tree specialists say that tree lopping, on the other hand, removes only a specific portion of a tree. Tree lopping is best for trees that need to be removed quickly because they grow too fast to support the weight of their branches. Typically, tree lopping is done when the tree has grown too big, or when the tree thins out and starts to die. During tree lopping, experts use shears to cut portions of the tree. If the tree needs to be removed from its spot, tree specialists can also dig up the tree and move it elsewhere.
Both tree lopping and tree felling (both of which are usually done by chainsaws) take time and effort. For that reason, people who want to do these activities on their own should plan accordingly. The first step involves setting aside enough time to properly plan the project, and it is recommended that people who intend to do tree lopping also have a rough idea about the procedures they are going to perform.
After choosing a date to perform tree removal or tree pruning, people who want to get their trees felled or trimmed should plan for it ahead of time. This includes finding a reputable tree removal company, finding out how much work will be involved, and making sure that all of the people working on the project will have a good experience. Tree services in Penrith are ideal if you want your tree services in Penrith to be as hassle-free as possible. Contact Penrith Tree Lopping at www.penrithtreelopping.com.au for the best arborist, tree lopping, and other tree services that you need.